Salon Air Quality & Ventilation Code Experts
In Desk Nail Dust Extractor
The Most Powerful Unit of its Type!
Introducing the Unique Patented Desktop Nail Dust Extractor that is specially designed for Nail Dust Extraction and can be used on the desk or fitted into the desk. This is the most powerful unit of its type anywhere, ( 77 feet per second downdraft velocity).
The Uniquely Designed motor pulls air using patented Vortex Technology from your working environment into the machine and through 6 inches deep Glass Hepa Filter and dust trap that is fully Independently Tested to remove dust, pet dander, allergens, pollen, etc at 99.999% efficiency to 0.3 microns and above.
Still Not Sure?
No interest if paid in full within 6 months
Additional Product Features & Specifications
How to use:
– The powerful motor is turned up and down with a variable speed knob, it is very unlikely that this unit would be used at top speed.
– Filters must be changed every 8 weeks to optimize efficiency. Replacement Filters are available and can be found on our “Accessories” page.
– The powerful motor is turned up and down with a variable speed knob, it is very unlikely that this unit would be used at top speed.
– Filters must be changed every 8 weeks to optimize efficiency. Replacement Filters are available and can be found on our “Accessories” page.
Specifications:
– The unit is made in lightweight Plastic and is just over 6 lbs. in weight
– 8.6 x 8.6 x 4.3 ” height
– If used as an in-desk extractor, a 9.25 x 9.25″ “cut out hole” is required.
– An average desk is 25/32 – 1 3/16″ deep and will allow airflow through the top grill and down through the fan and out the exhaust grill. If the desk is deeper than that it may block the exhaust and reduce airflow. Do not fit into a desk with a drawer under it without removing the drawer or fit the unit with the exhaust close to a drawer.
– The unit is made in lightweight Plastic and is just over 6 lbs. in weight
– 8.6 x 8.6 x 4.3 ” height
– If used as an in-desk extractor, a 9.25 x 9.25″ “cut out hole” is required.
– An average desk is 25/32 – 1 3/16″ deep and will allow airflow through the top grill and down through the fan and out the exhaust grill. If the desk is deeper than that it may block the exhaust and reduce airflow. Do not fit into a desk with a drawer under it without removing the drawer or fit the unit with the exhaust close to a drawer.
